AH 12000 LPH RO PLANT ( MANUAL / SEMI AUTO / FRP /SS / ISI / CUSTOMISED )

Core System Architecture & SpecsCapacity: 12,000 liters/hourMembranes: Typically uses 8 to 12 high-rejection Thin-Film Composite (TFC) membranes housed in FRP or stainless steel vessels.Recovery Rate: 50% to 65% (depending on raw feed water quality).Power Requirement: 10–15 HP motor setup (varies based on pump and custom stages).Typical Stages: Raw water feed pump → Sand filter → Activated carbon filter → Antiscalant dosing → Micron/cartridge security filter → High-pressure pump → RO membrane module → Post-treatment (UV/Ozonation).

Automation Grades: Manual vs. Semi-Auto vs. Fully AutoManual Operation:Control: Operators manually handle gate/ball valves for flushing, startup, and backwashing the sand/carbon filters.Monitoring: Relies on physical pressure gauges and manual TDS testing.Best For: Budget-sensitive setups with dedicated full-time operators on-site.Semi-Automatic Operation:Control: Combines manual valve adjustments for certain chemical cleaning cycles with basic electrical switch controls or automated high/low-pressure cutoffs.Monitoring: Equipped with digital pressure switches and a basic electronic panel that trips the high-pressure pump if feed water levels drop (dry-run protection).Best For: Facilities wanting basic safety protections without paying full PLC system costs
Fully Automatic (For Context): Runs entirely on a PLC/microprocessor panel with automated auto-flushing, auto-start/stop based on product tank levels, and digital flow metering
Customization OptionsFeed Water Adaptability: Configured differently if your source is high-TDS borewell water, municipal supply, or surface water.Dosing Systems: Addition of anti-scalant, pH correction, or chlorine dosing pumps depending on raw water scaling tendencies.Post-Treatment: Integration of UV sterilization systems or Ozonation setups for bottled drinking water compliance (ISI standards).If you're planning an installation, tell us: What is your feed water source and TDS level (ppm)?Do you need SS 304 vs. SS 316 grade material?Is a dedicated operator available on-site for manual/semi-auto controls?
we can help you pinpoint the exact configuration and power requirements you need.